OK, gamegetter, hopefully I won't be using the (.625 wave x 105" radials 40') any more on this thread. I'm using the model entitled "Imax 40' GPK mast horizontal", you see below. It is a bit different than the model I used in the Recap on page #6, but I think we'll find the results will be close.
The reason I changed the model is because I decided to "Cebikize" the model where all of the segments are very close to the same length etc. When I do that to most of my models the gain figures tend to drop just a little, which we might expect...as the model becomes more accurate.
I will also try and keep the wire number indicated on the Antenna View showing the antenna height, and I will indicate using notes for the radial lengths, and add to the caption the angle and height for the model. Hope this is clear. This is for consistency in the project, which I sometimes miss and where it can get confusing for the reader, like you noticed. During this process here, I've learned a new lesson which I must watch more closely in producing my models.
I will change the height to 27' feet and post it below to start. Then I'll wait for you next ideal, OK?
Here is my new starting model at 40' feet and I will then use just this model in your ideas for different iterations, OK?
[ATTACH]7382[/ATTACH]
