• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Marconi's new Gain Master with a matching network

I think / hope you finally got it NB

The samples from respected sources that DB posted show its not just our opinion.

You have a world full of antennas that will never look the same again.

Merry christmas.
Yessir, but now that I can at least visualize it, the proof is still in the oven.

...The pudding is still cooking.

I'm still going to build a set of 10m versions and test compare with two local stations within 5 miles, and a third at 35 miles, all with horizontal capability.

I'm still a week from moving in but once situated with all my parts, pieces & tools from storage, I'll be building both to be elevated between trees, up to about 45'-50', both fed with a Dentron 3000 tuner and balanced line,
PLUS,
a third; direct coax-fed 1/2 wave dipole - for comparison.

Once I've proven the full-wave works I'll extend it to .64/side and retest.

I want to get to this asap, but with a lot of snow & winter weather forecast, it might be a while.
No promises but asap! - I gotta KNOW!! :eek:
 
If it works you know your rf spectacles work.
It it does not work put the spectacles back on and look for what you did wrong (y)
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.