You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
Got my power cord ts-690s. Now this didn't come with a mic.
I want to wire up a 636L for now till I find a good mic for it.
Anyone know the wiring info for the Kenwood ts-690s so I can wire up the 636L?
Receive filter options above link. The best around!
I had a TS-450 for like 11 years.
Installed were these:
Cascade 2.4kc SSB filters (both IF's) radio has only one installed from factory (no longer available) add #94 instead
2.8 kc SSB filters (both IF's) #88 + #89
6.0 kc AM filter #100
1.8 kc narrow SSB filter #95 (though I rarely used that unless band was super crowded)
These make it a receiver beyond believe, when I sold the rig, I got more out of the filters than the rig!!!
I could out hear most rigs of the era. These are superior to the filters Kenwood made for this!
Receive filter options above link. The best around!
I had a TS-450 for like 11 years.
Installed were these:
Cascade 2.4kc SSB filters (both IF's) radio has only one installed from factory (no longer available) add #94 instead
2.8 kc SSB filters (both IF's) #88 + #89
6.0 kc AM filter #100
1.8 kc narrow SSB filter #95 (though I rarely used that unless band was super crowded)
These make it a receiver beyond believe, when I sold the rig, I got more out of the filters than the rig!!!
I could out hear most rigs of the era. These are superior to the filters Kenwood made for this!
This forum does not allow a single user to have more than one username. If anyone wants to change their username contact an admin and it will be done. Multiple accounts belonging to the same member will be deleted without warning.
jahnkeelectronics.com
