• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Mobile HF Whip

kd8gua

Member
Jul 10, 2012
2
0
11
I'm looking for a 12'-16' mobile HF whip antenna that uses a 3/8" x 24 mounting bolt. I have been using an 8' whip, but it doesn't tune well below 20 meters. My radio is a Motorola Micom 2TS, which also has ALE capability. Since I would need to change channels quickly, across many bands, single band Ham sticks will not work, and motorized antennas are just too bulky for the setup I want.

There are two manufacturers of the type of antenna I'm looking for, Motorola and Shakespeare. Motorola's FAD 1400 12' whip takes 18 weeks to ship, but uses 3/8" x 24 mounting hardware. Shakespeare's 120-99-4 16' whip has a lot of unknowns, including price, shipping time, and base hardware.

Does anyone know of any other whip antennas? Even used would be great.

Thanks!
 

I'm using this HF radio in a car and want to use my ball and spring mount on my rear quarter panel. I will be tying the whip over my vehicle in an NVIS configuration.
 
The shakespeare military version Beetle suggested is what came to mind for me, as well. I think I would start there.
 
I met a guy at a hamfest that had a two piece marine whip in a mobile setup. They were 11' sections that screwed together.

You might contact K0GB and pick his brain. Dude knows many people with specialized mobile arrangements.
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.