-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
-
A Winner has been selected for the 2025 Radioddity Cyber Monday giveaway! Click Here to see who won!
Need a schematic for Tripplite PR-25
- Thread starter WD9EON
- Start date
Did you try using Google?
UPS Battery Backup, Surge Protection, Cables, PDUs, and Rack Systems from Tripp Lite
don't need it now
I had tried Google before I came to this site. Doesn't seem to be out there.
Anyway, I fixed the problem, bad rectifier, didn't cross to anything, so I used
a 40 Amp bridge rectifier in it's place. Being a full wave PS, I didn't use the negitive side of the rectifier.
All seems well with it now. Thanks
I had tried Google before I came to this site. Doesn't seem to be out there.
Anyway, I fixed the problem, bad rectifier, didn't cross to anything, so I used
a 40 Amp bridge rectifier in it's place. Being a full wave PS, I didn't use the negitive side of the rectifier.
All seems well with it now. Thanks
That is a common problem among most power supplies I use the KBPC5010 for replacements and thatv usually takes care of future problems with it happening again. I was thinking when I first looked at your post that it was the dreaded rectifier failure and seen it was.
Im glad you have it up and going
Im glad you have it up and going
Jerry -
I Googled "tripplite pr-25". What came up was a list of possible hits, including a direct link to the Tripp-Lite web site, which is the link I posted earlier. It doesn't get any easier than that.
I Googled "tripplite pr-25". What came up was a list of possible hits, including a direct link to the Tripp-Lite web site, which is the link I posted earlier. It doesn't get any easier than that.