Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Need Help on Peak & Tuning a RCI-2980wx

  • Thread starter Thread starter matrix1272
  • Start date Start date
M

matrix1272

Guest
Hello All



I have Peaked and Tuned and Clipped the diode for the Modulation, to let it Swing Wide Open on a Regular 2980, But I Hear the Board in the New RCI-2980wx is Different, So I was wondering if Someone could Help me with the different Pods to Adjust (Name of them, and what they adjust), and I also Need to Clipped the Modulation, this Radio just don't Swing, Does Someone know what Diode or whatever it is that you Clip to let the Modulation Swing wide open? Thanks in Advance :-) Bobby


</p>
 

Hello All



I have Peaked and Tuned and Clipped the diode for the Modulation, to let it Swing Wide Open on a Regular 2980, But I Hear the Board in the New RCI-2980wx is Different, So I was wondering if Someone could Help me with the different Pods to Adjust (Name of them, and what they adjust), and I also Need to Clipped the Modulation, this Radio just don't Swing, Does Someone know what Diode or whatever it is that you Clip to let the Modulation Swing wide open? Thanks in Advance :-) Bobby


</p>
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom