G'day all... I've got this ATAS 120 and been using it for 2 years or so, now it suddenly wont work. Tried checking it up, the motor works perfectly, i'm guessing the problem is probably in the component's module. Does anyone here ever had the same problem? Is it possible to fix the module or it'd be better to buy a new one? Where can i buy the module set though? :mellow:
-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
NEED HELP!!!!!!!!!!!!
- Thread starter yc0ndn
- Start date
I've owned a few of these antennas and from my recollection they are sealed and not repairable by the end user.
I can't say specifically what the problem was, but the earlier ATAS-120's had a problem such as you are experiencing. It was 'cured', but not having one of those antennas I didn't pay much attention to what that 'cure' was.
I would think that one of the things you should do is check the control cable between radio and antenna (if you haven't already done so). I think there must be a 'user's group' for the ATAS-120, and that would be a very good place to ask about your problem.
Good luck with it!
- 'Doc
I would think that one of the things you should do is check the control cable between radio and antenna (if you haven't already done so). I think there must be a 'user's group' for the ATAS-120, and that would be a very good place to ask about your problem.
Good luck with it!
- 'Doc
ATAS-120 Parts diagram
http://k0lee.com/atasdir/ATAS-120TechnicalSupplement.pdf
Hope this helps....
All the Best
BJ
http://k0lee.com/atasdir/ATAS-120TechnicalSupplement.pdf
Hope this helps....
All the Best
BJ
Maybe I was wrong? Oh nooooooooo!!!!! Here's a link to site where the guy disassembles the 120 step by step.
KB5WIA Amateur Radio: ATAS-120A Disassembly and Cleaning