• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

need tram 1180 instructions

nfsus

Yeah its turned off, touch it
May 9, 2011
591
311
73
49
Arkansas
a buddy of mine gifted me a tram 1180 mag mount 144/440 antenna. he said he had overcut it trying to get it to match. anyone have the original instructions showing factory length of the stingers? its all over the place and while i have some spares to try and cut to fit, id much rather have measurements to start with. thanks
 

Manufacturer
Tram
Model #
B-10
Product Description
2M/70cm 5/8 Wave Antenna
Frequency (MHz)/ Color
144-148 & 440-450
Product Narrative
Base loaded Dual Band High gain antenna
Usable Bandwidth
4/10 MHz
Gain (dB)
3/6
Maximum Power (Watts)
75
Whip Length (In.)
36.5"
Whip Material
Stainless steel
Color
Black Base/Stainless Steel Whip
Mount Type
Order separately from NMO style mounts

 
  • Like
Reactions: AudioShockwav
Last edited:
  • Like
Reactions: AudioShockwav
I got it a few min ago. Bad jumper on the Nanovna. I already had a bunch of whips from a bundle of old business band antennas. Amazes me no instructions. I looked all over the net too. Even the diamond that looks and specs similar, nothing.they had trimmed the top section and apparently never trimmed the bottom sonwasnt too hard. But dammit that jumper drove me nuts
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.