first off..cool site.
now that thats out the way.
i just got a saturn from an old friend that has 2 problems.first the freq counter is the opposite of blank.by that i mean all the elements are lit up on the led numbers but after a while it will start working.i have shematics and have slightly above basic electronic skills so if someone could point me in the right direction i should be golden.the other problem is no echo,at first if you turned it on(the echo) it would dim the whole radio.i traced it down to the power wire coming from the switch to be hooked to ground instead of hot.it dosnt dim like a dead short anymore but still no echo.if the board is bad ill just replace it with a universal since i know what basic wires are there to use.any suggestions(other than dont use echo...lol)
now that thats out the way.
i just got a saturn from an old friend that has 2 problems.first the freq counter is the opposite of blank.by that i mean all the elements are lit up on the led numbers but after a while it will start working.i have shematics and have slightly above basic electronic skills so if someone could point me in the right direction i should be golden.the other problem is no echo,at first if you turned it on(the echo) it would dim the whole radio.i traced it down to the power wire coming from the switch to be hooked to ground instead of hot.it dosnt dim like a dead short anymore but still no echo.if the board is bad ill just replace it with a universal since i know what basic wires are there to use.any suggestions(other than dont use echo...lol)