You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

Thanks for the descriptive info Radioman!
I did the test as you advised. I put all the attenuator switches in the IN position, Put the fine control on "0" and with 30% modulation and the power switch on "INT" Also with the gen hooked to a radio I'm am hearing the signal.

Now if I turn the fine carrier adjustment down to -10 then the signal goes away.

So what do you think? Not shielded enough? Maybe I should get another gen. as I dont think this one is very stable as it floats off frequency a touch now and then.

BTW, I did DL the program Robb posted up and did the best I could with it. The radio has got to be better now but I still want it perfect if I can get it there. hi.

[QUOTE="longhaireddwb, post: 415187, member: 8010"] Thanks for the descriptive info Radioman! I did the test as you advised. I put all the attenuator switches in the IN position, Put the fine control on "0" and with 30% modulation and the power switch on "INT" Also with the gen hooked to a radio I'm am hearing the signal. Now if I turn the fine carrier adjustment down to -10 then the signal goes away. So what do you think? Not shielded enough? Maybe I should get another gen. as I dont think this one is very stable as it floats off frequency a touch now and then. BTW, I did DL the program Robb posted up and did the best I could with it. The radio has got to be better now but I still want it perfect if I can get it there. hi. [/QUOTE]

Top Bottom