You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

Please notice the bottom half of the graphic user interface - where it says 'Spectrum'.

Now please notice the narrow, tall green line at 1khz; that is the signal w/o any distortion around it. That is because I turned down the volume on the radio low enough to get the noise around it to settle down. Experiment until you get a similar picture. If you can't; then either you are doing something wrong or your sig/gen is just too unstable or even generating too much internal noise to make the SINAD program work as designed.

[QUOTE="Robb, post: 416618, member: 8446"] [IMG]http://www.worldwidedx.com/attachments/general-cb-services-discussion/9295d1361657376-noise-signal-ratio-1-jacko-sinad.jpg[/IMG] Please notice the bottom half of the graphic user interface - where it says 'Spectrum'. Now please notice the narrow, tall green line at 1khz; that is the signal w/o any distortion around it. That is because I turned down the volume on the radio low enough to get the noise around it to settle down. Experiment until you get a similar picture. If you can't; then either you are doing something wrong or your sig/gen is just too unstable or even generating too much internal noise to make the SINAD program work as designed. [/QUOTE]

Top Bottom