• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Odd IC chip.


Never seen one, but I remembered someone here asking about a radio that used that chip before. In that case it was the Standard Horizon 29A, which is in Sam's CB-94.

The uPD857 appears to be a programmable counter and divider, and not much else. The programmable divider is what your channel selector is connected to, and in the 29A that was pins 1, 2, 3, 4, 5, 6, 8, and 9, for a total of 8 pins.

I do not know if the uPD857 is set up for straight binary programming, or for BCD. You'd need to have or create a truth chart to figure that out.

It's probably modifiable for more channels by manipulating the programmable divider inputs, as it's way too early a chip to have a ROM component.

TL;DR It's a generation older than the uPD858. Not similar enough to use the same mods, but you can create your own.
 
Thats a tad over my head so id have to have someone else that knows these chips to figure it out for me.
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    BLACKOUT HF
  • @ BJ radionut:
    I am beginning the packing process...XENIA bound Going "Lite": this year....2 items for sale...Rig #1 = FT-920/Gud to Ex condition/Hand Mike/pwr cord/manual (NO BOX) ... #2 = My 1 owner FT-950....EX condition...Original Shipping Double Box/Factory Manual/Never used hand mike...Booths 9107-9111...Ya'al come by say hello...
  • @ BJ radionut:
    Incoming Region Produces X3 Solar Flare
    May 15, 2024 @ 14:55 UTC
    Another major solar flare, but this time from an active region just beginning to turn into view off the east limb. It is possible that the group responsible is old AR 3654 from the previous rotation. The latest flare, an X2.99 event just peaked at 14:38 UTC (May 15). Stay tuned