Older RCI 2950 CB Channel Read out Mod.

[curlyjo]

Hi. I recently bought a very nice 2950 from another forum member through the Swap Shop. I would like to do the CB Channel Readout Mod. I found the instructions on the net. They seem very straight forward. 1- Locate J1. There will be a jumper on pins P1-P2. 2- Remove jumper and place on P2-P3 3- Press Lock Button on front panel. The readout is now displaying CB channels numbers 1-40. Also will display "A" channels. 4- Press Lock again to return to VFO. Where is J1? Is it easy to get to? I thought this would be a easy thing to do. just remove the bottom cover and J1 would be near the front of the radio. Any Help out there? Thanks!!!

 

[Captain Kilowatt]

Look on the faceplate panel. It is not on the main board. It is just a small three pin jumper plug with a black flea clip shorting two pins.

 

[curlyjo]

Thanks! I am looking. I know it is right there in front of me. Just can't I.D. it.

 

[curlyjo]

Thanks Captain ! ! ! Worked the first time. L@@king at the radio head on. The jumper is left of center if anyone is interested. :sneaky2:

 

[Grogan]

Job well done.