Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Panasonic RJ-3660 Backwards Driving

Lkaskel

Lkaskel

Well-Known Member
I Support WorldwideDX.com!
Aug 4, 2017
544
439
73
62
Hi Gang,
I have on the bench a Panasonic RJ-3660 that I have been working on. New caps, de-mod and align. The radio is AM only and will dead key at 3.7 watts. Modulation looks great on the scope but it id dropping the power back to 3 watts with a dual tone. I have re-aligned it a few times to be sure it is set correctly. The AMC is not clipped. Any thoughts to why it would have this behavior?

Thanks as always!!!!
 

Lkaskel said:
Hi Gang,
I have on the bench a Panasonic RJ-3660 that I have been working on. New caps, de-mod and align. The radio is AM only and will dead key at 3.7 watts. Modulation looks great on the scope but it id dropping the power back to 3 watts with a dual tone. I have re-aligned it a few times to be sure it is set correctly. The AMC is not clipped. Any thoughts to why it would have this behavior?

Thanks as always!!!!
Click to expand...
Current starved?
 
  • Like
Reactions: Woody-202, midnight special and Shadetree Mechanic

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
  • @ COWBOYS:
    Denton GL 1000 ham amp comes on, but will not key up
  • @ COWBOYS:
    What can I do to make my Denton GLS 1000 amp to load ?
  • @ AudioShockwav:
    Try starting a new thread in the Amplifier section and asking the question, more people will see it to respond.
  • @ iw7ed:
    hello


      Top Bottom