Hi, Anyone have a pic of the plastic pdl-2 plastic hub where the curved matching parts attach to it in the front? I need a close up because I am not sure if I got it right.
Roger
Roger
-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
PDL-2
- Thread starter airplane1
- Start date
Did you build your own hub, or do you just need the assembly instruction?
http://www.cbtricks.com/ant_manuals/avanti/pdl-2_av122.pdf
http://www.cbtricks.com/ant_manuals/avanti/pdl-2_av122.pdf
I have an original and rebuilt it with new stainlees fasteners. I have a instruction book for it but it dont show what the hub looks like all put togethr. What I am trying to say is the inner screws on hub holding the curved sections on the hub stick out of the hub about 1/4 inch or so where the curved sections screw on, the bushings on the screw show is this correct? should they stick out a bit?
I have a new PDL-II in the box. I can take a picture of the hub, but I do not have one that is assembled.
Thanks, I need to see one together. I got a new in box pdl also for a backup in case the older rebuilt one I have fails.
I talked to guys that had them up for more than ten years without a problem.
I just want to be shure it is built correctly.
Roger
I talked to guys that had them up for more than ten years without a problem.
I just want to be shure it is built correctly.
Roger