• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Power Supply

  • Thread starter Thread starter KyPoohBear
  • Start date Start date
K

KyPoohBear

Guest
how much it gonna cost to get the plan for this 250a power supply? Need one and prefer to build rather than buy...


<img src=http://www.chargerscastle.com/users/kypoohsig.gif>

Poohbear
618 in the BlueGrass State</p>
 

wouldnt think so...Ive taken many apart though!! hehe I have the basic design.. WHat do you need to change to up the Amperage? Come on somebody must know.. =)


<img src=http://www.chargerscastle.com/users/kypoohsig.gif>

Poohbear
618 in the BlueGrass State</p>
 
Who? Me Or KD7? Basic Power SUpply Design can be found on the web with the forumlas to find specific component values


<img src=http://www.chargerscastle.com/users/kypoohsig.gif>

Poohbear
618 in the BlueGrass State</p>
 
Has anyone ever purchased a Viper 150 Amp power supply? I seen these at (CB's At Their Best) web site before and was thinking about getting one. www.angelfire.com/oh3/cbs...estsupply/ *Thanks for any feedback*


</p>Edited by: <A HREF=http://pub86.ezboard.com/umuddywaters1.showPublicProfile?language=EN>muddywaters1</A> at: 8/13/02 9:48:55 am
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.