• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

President Richard Export (Cobra 148GTL DX) - need a tuning can

After looking at the photo close-up I spotted at least 3 other core tops that are cracked. That typically happens when too much force is used or from an improper sized tool.
Guessing others have been in the radio before as some of the settings didn’t seem stock. Going to talk with Kens Electronics tomorrow about parts. Really cool radio, does take a couple of minutes to warm up on freq from power on but has good audio on AM and SSB with stock microphone.
 
Last edited:
  • Like
Reactions: AudioShockwav
Talked with kens electronics and unfortunately he didn’t have the part.

Uniden PB-010 board - coil LB137 92187. (L37) location.

If anyone has one let me know! Thank you
 
Have you tried:
Scan down the page until you see the LB137. Seems to list many on that line. Could they all be the same? I don't know, you'd have to ask him for your specifics.
Good luck finding your part.
73
 
Have you tried:
Scan down the page until you see the LB137. Seems to list many on that line. Could they all be the same? I don't know, you'd have to ask him for your specifics.
Good luck finding your part.
73
Yeah an LB137 out of a TRC453 (L15) or PB042 President Jackson (L22/L23), PC999 President Grant (L29/L38), Courier Galaxy IV (T16/T17) would work too :)
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.