You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

You have to program the Split first or it will not work
Look in your manual and it will tell you how to do it.
OR
Press Program
Press Split
Using the SHF button and the vfo knob , adjust the display to read 01000
Press ENT
Go to 29.640.0 (or what ever FM repeater frequency you are going to use)
Press Split again, you will see a (-) in the display, this tell`s you that when you TX it will shift DOWN 100 Khz, if you press shift again, it will show a (+) in the display, this tell`s you that when you TX it will shift UP 100 Khz ( ten meter repeaters use a (-) shift.
Give it a try.
Mine works great on the ten meter repeaters.
You will find that a lot of them do not use CTCSS.
There are a couple of Mfg`s that make aftermarket CTCSS boards that will work with these radio, I have never had to use one.

73
Jeff

<blockquote data-quote="AudioShockwav" data-source="post: 377100" data-attributes="member: 6">You have to program the Split first or it will not workLook in your manual and it will tell you how to do it.OR&nbsp;Press Program&nbsp;Press SplitUsing the SHF button and the vfo knob , adjust the display to read 01000Press ENTGo to 29.640.0 (or what ever FM repeater frequency you are going to use)Press Split again, you will see a (-) in the display, this tell`s you that when you TX it will shift DOWN 100 Khz, if you press shift again, it will show a (+) in the display, this tell`s you that when you TX it will shift UP 100 Khz ( ten meter repeaters use a (-) shift.Give it a try.Mine works great on the ten meter repeaters.You will find that a lot of them do not use CTCSS.There are a couple of Mfg`s that make aftermarket CTCSS boards that will work with these radio, I have never had to use one.73Jeff</blockquote>

[QUOTE="AudioShockwav, post: 377100, member: 6"] You have to program the Split first or it will not work Look in your manual and it will tell you how to do it. OR Press Program Press Split Using the SHF button and the vfo knob , adjust the display to read 01000 Press ENT Go to 29.640.0 (or what ever FM repeater frequency you are going to use) Press Split again, you will see a (-) in the display, this tell`s you that when you TX it will shift DOWN 100 Khz, if you press shift again, it will show a (+) in the display, this tell`s you that when you TX it will shift UP 100 Khz ( ten meter repeaters use a (-) shift. Give it a try. Mine works great on the ten meter repeaters. You will find that a lot of them do not use CTCSS. There are a couple of Mfg`s that make aftermarket CTCSS boards that will work with these radio, I have never had to use one. 73 Jeff [/QUOTE]

Top Bottom