RCI- 2590 No DX on it. Can't figure MOD out.

[Eddie]

It's a EPT 295013z Board. X-tra Freqs trying for. Can not for the life of me find this J1 and J2 on the CPU board. Wish I could post the PIC I took so's somebody could circle the correct answer. Any ideas. Alot of Jumpers on that board. Driving me to the point that I may be the one to jump.
Cbtricks is a great site but, every listing for this mod is textual. The jumpers on this board are not labeled. The only J1 and J2 labeled are back by the finals on the main PCB. Don't wanna cut or jump them. It's gotta be a jumper with over three wires going to it. Many 2 jumps. Iffin I could mail this pic. Maybe someone could show me. Email if need be or see my site.
ED

 

[King Mudduck]

maybe this will help.www.cbtricks.com.

 

[Eddie]

Well I do appreciate everyones help. In time I'm sure I'll find the right pic or person. still looking though for a pic of this mod. I have a pic of the board not sure which jumper to snip and solder. :idea:

 

[WA1BXY]

with the radio facing you, with the cpu side up, look in the bottom right hand corner.. thereyou find them i do beleive :?

 

[Eddie]

Thanks BullDog 369

I found it. Thanks alot all.