Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

RCI-2995 Display problem

Plumber-G

Plumber-G

Plumber-G
Nov 17, 2012
69
16
18
Fired up the radio today everything just fine...... after about 20 minutes the display shows "PA" and none of the buttons or the frequency dial work except for the dimmer button. When I transmit the display returns but then goes back to PA.
Any ideas what could be the problem??
Thanks
George
 

Sounds like a CPU problem ;) Although I would try cleaning the mode selector rotary switch with contact cleaner first ;)
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom