Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

RM KL-405


This is all I could find.



Amplifier Mobile, 12-14 VDC, HF( 3 - 30MHz), AM/FM/SSB/CW, Including Pre-Amplifier. Input: 1 - 10 Watts AM/FM; 2 - 20 Watts SSB/CW. Output: 200 Watts Max AM/FM; 400 Watts Max SSB/CW.

KL405 is introduced early 2013. It is same product as KL400 with some small changes. Changed is Bias Regulation, DC-Connector type and printing on panels.

Technical Specifications

Electronic switch
Inversion polarity protection
Frequency HF
Supply 12-14 VDC
Input energy/power 12-24 A
Input power 1-10 W
Input power SSB 2-20 W
Output power 200 W Max
Output power SSB 400 W PEP Max
Mode AM-FM-SSB-CW
Fuse 2 x 12 A
Output power level 6
Size 170x210x62 mm
Weight 980 gr.
Antenna preamplifier 26 dB
 
Thanks!

I was only able to find about 3/4 of what you posted. I was thinking that DC connector looked like it accepted power poles.

Edit:

It does use Power Poles.
 
Last edited:

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom