Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Royce 1 673 mod pll sardine can

I remember you being after 26.815MHz, if that is the case, you will need to also change P7 and P8 inside the sardine. I forgot you were trying to get that freq in another thread.. So thats binary 01110001 into P8-P1.

lol I dont even know why im guessing at this point, the whole chart is up there. you want a custom range chart, I can set my print area to that.
 
  • Like
Reactions: Staybolt
Yes I'm after lowers. The chart shows mainly uppers. If thats the case I'll leave the radio as is. I was just curious if it could be modded.
 
Staybolt said:
Yes I'm after lowers. The chart shows mainly uppers. If thats the case I'll leave the radio as is. I was just curious if it could be modded.
Click to expand...
Then you would need to be able to change P5 P6 P7 and P8, the latter two being accessible only in the sardine.
 
  • Like
Reactions: tecnicoloco

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom