• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Scored A Nice Frequency Counter On Ebay

KD8HMO

Sr. Member
Aug 3, 2008
172
103
138
Kalida, Ohio
www.protrucker.net
I just scored a really nice Fluke 1920A 500mhz freq counter on Ebay. Got it for $70 and free shipping. It seems to be in really nice shape and clean. I`m sending it to a repair shop to have it gone over and calibrated.

fluke1920a.jpg
 
  • Like
Reactions: Robb

Did you get it from "TryC2"? I have bought about two dozen pieces of test equipment from them with only one failing to meet standard.
 
I bought this one for $88.00 201742724821 Plus 15.02 shipping.
I don't know if it is accurate yet I'm waiting for access to a calibration standard.
Racal Dana 1992 Nanosecond Universal Frequency Counter

Yours is a good catch too!
 
I`m sending it to a repair shop to have it gone over and calibrated.

If you're going to set up a shop for repairing radio gear get yourself a 10MHz Rubidium or GPS Frequency Standard and you don't need to worry about calibration for any of your gear that measures frequency which can use an external 10MHz clock source.
 
  • Like
Reactions: Robb and BBB
I wont need anything like that for quite a while. I am just starting to learn the basics. If they replace any bad parts like electrolytics and recalibrate it at that lab, that will be more than I need. This was a pretty decent counter back in the day.
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.