You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Reply to thread

Message

I believe the name is Glen, thank you for the link, I have been through that alignment, what I need is,the way to set the frequency's on the Crystals. I know if you to the alignment that the frequencies get really close to the settings, I was wondering if there is a different way to do this if they are still off center. What I will do is do the alignment again, and see again, if the frequency gets close to the settings for the Rx and Tx, but it seems that to set one the other goes off frequency, does not make sense to me. I am also going to throw in a 10.240 Crystal, I did the 10.695, as I cannot believe that 2 Crystals would go bad in one time. I will update this evening, after I am doing doing it again. Talk soon,wish me luck that it is another Crystal, nothing left to adjust.

[QUOTE="Mark A Bradley, post: 763428, member: 54700"] I believe the name is Glen, thank you for the link, I have been through that alignment, what I need is,the way to set the frequency's on the Crystals. I know if you to the alignment that the frequencies get really close to the settings, I was wondering if there is a different way to do this if they are still off center. What I will do is do the alignment again, and see again, if the frequency gets close to the settings for the Rx and Tx, but it seems that to set one the other goes off frequency, does not make sense to me. I am also going to throw in a 10.240 Crystal, I did the 10.695, as I cannot believe that 2 Crystals would go bad in one time. I will update this evening, after I am doing doing it again. Talk soon,wish me luck that it is another Crystal, nothing left to adjust. [/QUOTE]

Top Bottom