• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Silly question for the seriously minded genius types

You could make a YAGI type of antenna. Set the reflector elements to resonate at the highest plus some end of your frequency, driven element at the center, and the director at the low end of the frequency. I built one like that for my home and it worked pretty well for about 10 days and the a high wind from a Thunder Storm flattened my radio shack and the tower as well. I was working on changing the spacing and tuning to get the best front to back ratio and best receive gain.

You got your elements lengths mixed up. The reflector resonates at the LOWER freq and thus is LONGER while the director resonates at a HIGHER freq. and is shorter. I know you knew that but simply made a typo. I also knew that I just HAD to point it out. :p
 
  • Like
Reactions: Tallman

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.