Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

slipseat toolbox installation questions

  • Thread starter Thread starter mikabl
  • Start date Start date
M

mikabl

Guest
ok, got my am/fm with 2 6.5" speakers and my 2970dx mounted up nice inside my toolbox. but I'd like to do away with the cb speaker. Can I just wire up the speaker output from the 2970 to one of the stereo speakers or would that cause issues when I play the stereo? I mean having 40+ watts of hard rock music blasting into the speaker out on the 2970 can't be good I'm thinking! Is there any type of circut that would prevent this from happening of is there a better way to hook it up?
i







2970dx Wilson Trucker 2K in a daycab



M</p>
 

ok, got my am/fm with 2 6.5" speakers and my 2970dx mounted up nice inside my toolbox. but I'd like to do away with the cb speaker. Can I just wire up the speaker output from the 2970 to one of the stereo speakers or would that cause issues when I play the stereo? I mean having 40+ watts of hard rock music blasting into the speaker out on the 2970 can't be good I'm thinking! Is there any type of circut that would prevent this from happening of is there a better way to hook it up?
i







2970dx Wilson Trucker 2K in a daycab



M</p>
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom