Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

SSB power adj. on Kenwood TS-930S

Phil501

Phil501

CDX-501 back in da mix!!
Apr 6, 2005
217
1
28
57
Western Nevada
Hey guys....I'm real happy with my Kenwood that I picked up......But I have a question.....My wattage is real low. Only swingin' around 15 to 30w.....I believe the person before me turned down the SSB power to run a amp or something......Processor on it jumpes to around 50 to 60w......Does anyone know if there is a variable inside radio to kick it up a notch.....The owners manual says it does 250w PEP......But I was hoping for around 80 to 100w.......Any help from you kenwood experts would be appreciated........Thanks all.........<img src=http://www.ezboard.com/intl/aenglish/images/emoticons/roll.gif ALT=":rollin">


phil501sig.gif
</p>
 


dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom