• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Supply of 2SB817 and 2SA1012-Y

Hawkeye351

Sr. Member
Jun 27, 2021
855
776
103
58
Hi all,
I been buying my parts in bulk orders of 30 or more of everything I need. I'm now running kinda low on 817 and 1012 regulators.

I was getting them both from Digikey, but they won't sell anything less than a 300 dollar order on the 817's.

Anyone know of a good source for 817 and 1012 transistors?
Please no eBay links, I've been pinched three times using eBay.

I see I can get the 7805's on Amazon at a decent price. I also noticed I can get 5 of the 817's on Amazon but they come with those 1077 transistors I'll never use.
 

Hi all,
I been buying my parts in bulk orders of 30 or more of everything I need. I'm now running kinda low on 817 and 1012 regulators.

I was getting them both from Digikey, but they won't sell anything less than a 300 dollar order on the 817's.

Anyone know of a good source for 817 and 1012 transistors?
Please no eBay links, I've been pinched three times using eBay.

I see I can get the 7805's on Amazon at a decent price. I also noticed I can get 5 of the 817's on Amazon but they come with those 1077 transistors I'll never use.
Here ya go super tech. https://www.mouser.com/datasheet/2/54/tip36-49435.pdf
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.