You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

"Just what is ment by swing?"

the proper terminology is modulation index or modulation percentage. the term/s is/are used to describe the ratio between the maximum and minimum voltages present in a modulated signal referenced to the resting unmodulated carrier.

the method of power measurement must be taken into account here if the results are to provide an accurate representation of the resulting power relationships. the two most often used measurement methods are PEP and AVG.. an asymmetrically modulated signal representative of a modulation index of 1 (100%) exists when in the case of AVG. power the modulated power output is approximately 1.5 times the resting unmodulated carrier and in the case of PEP when modulated power output is 4 times the resting unmodulated carrier.

these facts are mathematically supported and are not open to interpretation.
i won't bore you with the algebraic equations unless requested or you can view them here.

http://www.firecommunications.com/hlsos.html

<blockquote data-quote="freecell" data-source="post: 107185" data-attributes="member: 30">&quot;Just what is ment by swing?&quot;the proper terminology is modulation index or modulation percentage. the term/s is/are used to describe the ratio between the maximum and minimum voltages present in a modulated signal referenced to the resting unmodulated carrier.the method of power measurement must be taken into account here if the results are to provide an accurate representation of the resulting power relationships. the two most often used measurement methods are PEP and&nbsp; AVG.. an asymmetrically modulated signal representative of a modulation index of 1 (100%) exists when in the case of AVG. power the modulated power output is approximately 1.5 times the resting unmodulated carrier and in the case of PEP when modulated power output is 4 times the resting unmodulated carrier.these facts are mathematically supported and are not open to interpretation.i won&#039;t bore you with the algebraic equations unless requested or you can view them here.<a href="http://www.firecommunications.com/hlsos.html" target="_blank">http://www.firecommunications.com/hlsos.html</a></blockquote>

[QUOTE="freecell, post: 107185, member: 30"] "Just what is ment by swing?" the proper terminology is modulation index or modulation percentage. the term/s is/are used to describe the ratio between the maximum and minimum voltages present in a modulated signal referenced to the resting unmodulated carrier. the method of power measurement must be taken into account here if the results are to provide an accurate representation of the resulting power relationships. the two most often used measurement methods are PEP and AVG.. an asymmetrically modulated signal representative of a modulation index of 1 (100%) exists when in the case of AVG. power the modulated power output is approximately 1.5 times the resting unmodulated carrier and in the case of PEP when modulated power output is 4 times the resting unmodulated carrier. these facts are mathematically supported and are not open to interpretation. i won't bore you with the algebraic equations unless requested or you can view them here. [url]http://www.firecommunications.com/hlsos.html[/url] [/QUOTE]

Top Bottom