• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

SWR Meter Lifespan

Riverman

Sr. Member
I Support WorldwideDX.com!
Nov 12, 2013
3,063
3,422
273
Do swr meters suffer from old age like radios?
I have an old Radio Shack model that I've had for years and years. It still looks new and has never been dropped or bumped. Still good?
 

They are made of a pickup coil, wire, a meter, a switch, adjustable resistors for internal tuning, and 1N34 germanium detector diodes. Rarely, a diode might fail. Rarely. Or the switch gets dirty or wears out. Variable resistors might get dirty. Meter might get sticky/stuck. Can't think of any other problems.
 
Last edited:
Hi,
Thanks!

I payed $90 shipped, which was more than I wanted to put in an SWR Meter!

But, it is power and SWR and the "cheap" meters are $30-40!!!

Sometimes better to bite the bullet and just cry ONCE!
 
They are made of a pickup coil, wire, a meter, a switch, adjustable resistors for internal tuning, and 1N34 germanium detector diodes. Rarely, a diode might fail. Rarely. Or the switch gets dirty or wears out. Variable resistors might get dirty. Meter might get sticky/stuck. Can't think of any other problems.

What I described there is a passive type meter. It is fine for checking SWR; but not necessarily accurate for reading true peak power.

True peak power meters have more circuitry involved. Which requires a small amp circuit to be able to make the meter move when weak parts of the signal need to be made large enough to move the meter. As well as needing a battery or external power source to operate the extra circuitry. That is how they differ from passive-type meters. Doesn't mean passive meters aren't accurate for SWR - they are; but not really accurate for honest peak power readings. Fine for testing dead key power; but as much as 10% less for showing peak envelope power ('PEP') readings. Just a FYI . . .
 
Last edited:
What I described there is a passive type meter. It is fine for checking SWR; but not necessarily accurate for reading true peak power. True peak power meters have more circuitry involved. Which requires a small amp circuit to be able to make the meter move when weak parts of the signal need to be made large enough to move the meter. That is how they differ from passive-type meters. Doesn't mean passive meters aren't accurate for SWR - they are; but not really accurate for honest peak power readings. Fine for testing dead key power; but as much as 10% less for showing peak envelope power ('PEP') readings. Just a FYI . . .

Thank you.
 
Wouldn't the lifespan of a meter be dependent on the quality of meter? And maybe, where it is kept?

I don't mean to be argumentative. I have a Astatic meter that I kept in my truck; it's innards rattled apart. Specifically, a piece that was soldered to the board popped off. It's a cheap, $30 meter, so I can't complain. But, it being cheap, I figure that it may not have been all that well made, to begin with.
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.