• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Reply to thread

I gather you mean at the ANT connector at the back of the amp. I have done this. I had to use both the radios swr meter and the one after the amp with a male to male connector and a Nessi RS-27 meter. I was told when doing it this way to balance at the radio and after the amp, as I do a 1 and 40 match tune. The SWR at the radio is reading backwards of the after the amp meter. With the amp on I can get it at 1.3 on the radio and 1.5 after the amp. I use two jumpers 15ft LMR400UF. One radio to amp and one amplifier to antenna. I thank you for all the info although I am clumsy and not technical at all and would probably f up anything I try that is explained to me inside the amp LOL. Hence the reason I was asking here.