• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

TNT-1500 problems

Yes, I think it´s an imbalance cause I measured the current of the 4 pairs and it´s all the same so the TR´s might be ok.
Bad combiners perhaps?
 
When a combiner resistor smokes one stage is producing more power than the other,this is what causes the resistor to get hot. you have 2 100 ohm resistors on the combiners where the 2 transistor stages are being tied together,which one of these is getting hot? also check your 10 ohm swamping resistors on bases of all transistors.
 
There are 3 output combiners. 2 for the 4 pairs and behind the 2 combiners and the last one is getting hot. You see it on the pictures were the coil is soldered.
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.