You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

I am getting confused.. So can I just keep what I have now? As far as the 2 2" pipes? I dont have to go cutting the other pipe down and slipping a 2 1/2" plumbing pipe over it. I can leave the 2 2" pipes and order a 20 foot aluminum 1.5" and slip it 3 feet into the 2"?? This will be strong enough for the imax right? I will just remove the sleeve I made and just insert the 20 foot 1.5" pipe into the 2"? the wall thickness on the aluminum says 0.15", is that thick enough to support the imax? Here is a picture of my sleeve I will remove..

[ATTACH=full]20783[/ATTACH]

[QUOTE="Troubleshooter, post: 588094, member: 47562"] I am getting confused.. So can I just keep what I have now? As far as the 2 2" pipes? I dont have to go cutting the other pipe down and slipping a 2 1/2" plumbing pipe over it. I can leave the 2 2" pipes and order a 20 foot aluminum 1.5" and slip it 3 feet into the 2"?? This will be strong enough for the imax right? I will just remove the sleeve I made and just insert the 20 foot 1.5" pipe into the 2"? the wall thickness on the aluminum says 0.15", is that thick enough to support the imax? Here is a picture of my sleeve I will remove.. [ATTACH=full]20783[/ATTACH] [/QUOTE]

Top Bottom