You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

I'm assuming your 2in pipe is 2- 10ft sections coupled for 20 ft.

I would still check with the dealer to make sure 1 1/2 pipe will fit inside your 2 inch.

Also be sure 1.25 will slip into the 1.5, that sounds a bit tight to me.

If the Imax Ubolts can accept a 1 inch mast, a 1 inch should fit inside the 1.5 and do that.

All that will give you 40ft and you'll have plenty to slip into each section.

That T1061 pipe is some remarkably strong stuff for how light it is.

If you get assurance ftom the dealer that all that will slip inside each other, then your good.

[QUOTE="fourstringburn, post: 588112, member: 2920"] I'm assuming your 2in pipe is 2- 10ft sections coupled for 20 ft. I would still check with the dealer to make sure 1 1/2 pipe will fit inside your 2 inch. Also be sure 1.25 will slip into the 1.5, that sounds a bit tight to me. If the Imax Ubolts can accept a 1 inch mast, a 1 inch should fit inside the 1.5 and do that. All that will give you 40ft and you'll have plenty to slip into each section. That T1061 pipe is some remarkably strong stuff for how light it is. If you get assurance ftom the dealer that all that will slip inside each other, then your good. [/QUOTE]

Top Bottom