You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

well i cant seem to find what board is in this radio except that its some sort of version of the EPT69610Z board.

sounds like the problem is that someone adjusted the wrong pot inside the radio and turned the squelch range pot by accident or because the info they were using was incorrect.

to me it really sounds like your squelch is all the way tight and wont let any receive through it.

i dont know which VR to tell you to adjust to fix this because i cant find the info.
if someone can come up with a schematic or better yet, service manual for it; just find the internal squelch range VR and see if its adjusted all the way one direction.
adjusting this VR to around half way should get you started, and you can put it where you want it after that.

sorry i cant be of more help than that.
LC

[QUOTE="loosecannon, post: 164529, member: 1368"] well i cant seem to find what board is in this radio except that its some sort of version of the EPT69610Z board. sounds like the problem is that someone adjusted the wrong pot inside the radio and turned the squelch range pot by accident or because the info they were using was incorrect. to me it really sounds like your squelch is all the way tight and wont let any receive through it. i dont know which VR to tell you to adjust to fix this because i cant find the info. if someone can come up with a schematic or better yet, service manual for it; just find the internal squelch range VR and see if its adjusted all the way one direction. adjusting this VR to around half way should get you started, and you can put it where you want it after that. sorry i cant be of more help than that. LC [/QUOTE]

Top Bottom