I have a TRC 458 that has transmits fine, but has very low receive in normal mode. The receiver works fine when the PA/NB buttons are engaged to monitor cb band. Any suggestions?
-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
TRC458 Low receive help
- Thread starter digitalwacker
- Start date
Cobra 139XLR
There are a number of service bulletins on the above page; one of them cites a problem with the low/no receive. The Cobra 139XLR and the R/S TRC-458 share a similar chassis and similar problems. Think I would start looking through those bulletins and start from there - IMO . . .
There are a number of service bulletins on the above page; one of them cites a problem with the low/no receive. The Cobra 139XLR and the R/S TRC-458 share a similar chassis and similar problems. Think I would start looking through those bulletins and start from there - IMO . . .
Thanks for the suggestions. Problem solved thanks to TheCBDoctor. C103 & C104 were bad. Changed them and radio is back up.