Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

TS120 & TS130 11 meter conversion?

F

fasteddy

Active Member
Apr 5, 2005
377
2
26
Need the 11 meter conversions for these two radios.

Thanks

fasteddy<img src=http://www.ezboard.com/intl/aenglish/images/emoticons/smile.gif ALT=":)">


mid79290big.jpg
</p>
 

Ok so the 130 is not convertable to 11 meters. I know that the 120 is, I talk to fella out of the Dominican Republic that has one. This is for a friend. Thanks

fasteddy<img src=http://www.ezboard.com/intl/aenglish/images/emoticons/smile.gif ALT=":)">


mid79290big.jpg
</p>
 
fasteddy,If memory serves me the 120 needs crystal swap.Most rigs that just do the ham bands need a crystal to cover 11.General cov. usually need just a wire clipped or resistor or diode clipped.Not sure of the 130...MN102 Does the 130 have gen. coverage rx.?


</p>
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom