• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Uniden Pro 520XL

  • Thread starter Thread starter this_is_nascar
  • Start date Start date
T

this_is_nascar

Guest
I've decided on this radio due to its compact size and ability to handle off-road useage. I've read that although there's not too much that can be done in the way of peaking/tuning this radio, some improvements can be gained. My intent to keep the stock microphone and have it peaked/tuned to the best of its ability, with the focus being on the best possible modulation I can get.

The question is, where's the best place to get this peak/tune done?
 

WOW !! YOUR IN CHERRY HILL !! SAW THAT MOVIE !! NJ ? IM NOT SURE ? BUT DTB IS IN PEN. ,HE'S ON THIS FORUM ALOT AND HE DOES DO MAIL ORDER IF YOUR NOT TO CLOSE TO HIM ? OTHER THEN THAT , IM SURE SOMEONE ELSE WILL KNOW OF A PLACE IN YOUR AREA . GOOD CHOICE IN THE LITTLE UNIDEN 520 , HOPEFULLY YOU GET A DECENT ANTENNA TO GO WITH IT. GOOD LUCK AND IM SORRY ABOUT THE CAPS. PEACE
 
As far as tough as nail CB radios ----- for my money the Unidens are hard to beat . I have an old Uniden 33 ( a pre-curser to the 510 & 520) & I've owned 68's, 78's & a couple of 510's with NO Failures ! I have slipseated for 30+ years & I think this is hard on CB's . chainsaw- out-
 
cb type radios unidens are about as good as it gets
there are 3 tuning slugs inside radio but im not sure what they are without looking it upL3,L4,L5something like thnat,not sure
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.