• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

UR6QW EQUALIZER, NOISE GATE, COMPRESSOR

KJ4CYH

Active Member
Dec 9, 2018
149
32
38
62
Up for sale New Generation of UR6QW - 8 Band Voice Equalizer + Sound Compressor + Echo Processor + Noise Gate to the ICOM Radios.

This unit can be used with any type of ICOM radios with 8 pin microphone connector. There is NO battery or power supply needed to feed this device. This unit take energy from you radio thru the mic connector.

Easy to use!!! Just connect this Sound Processor to the 8 pin mic connector on your radio and then connect the standard ICOM microphone to this unit and it is ready to work. Then turning the pots on its panel just get an excellent quality of your signal. To use the ratio pot in DX pile ups. Echo prosessor will make your signal special and selected.

NEW!!! - NOISE GATE eliminates background noise when you stop speaking - no more amplifier fan noise, dogs barking, kids music or traffic

$125.00 shipped CONUS ONLY, sold as is!
 

Attachments

  • 20200207_122956.jpg
    20200207_122956.jpg
    5.3 MB · Views: 690
  • 20200207_123016.jpg
    20200207_123016.jpg
    5.2 MB · Views: 536
  • 20200207_122951.jpg
    20200207_122951.jpg
    4.5 MB · Views: 605

I like mine. Ive made a couple jumper adapters so I can use it on multiple radios.
What I didn't like was all the heat put on that potentiometer. While it didnt do any instant damage im betting it greatly shortened its life.
20200424_081747~2.jpg
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.