You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Reply to thread

Message

Three pieces of 12ga wire 102" give or take, long soldered to where your shield of the coax can connect to it. Pull them out equidistant as a triangle and about 45 degree angle to the vertical element.

Trim the lengths of the ground plane wires to get the SWR adjusted.

[QUOTE="SR385, post: 95303, member: 3106"] Three pieces of 12ga wire 102" give or take, long soldered to where your shield of the coax can connect to it. Pull them out equidistant as a triangle and about 45 degree angle to the vertical element. Trim the lengths of the ground plane wires to get the SWR adjusted. [/QUOTE]

Top Bottom