You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Reply to thread

Message

you could allways skip the whip and just use wire. make a simple di-pole. 108 inches up to the center of the coax and start with about 118 inches for the down side and hook it to the shield of the coax. trim the longer end after you get it set up to ajust the swr. you could get fancy and hook up a 1:1 balun at the antenna feed point. 8)

[QUOTE="FL Native, post: 95355, member: 33"] you could allways skip the whip and just use wire. make a simple di-pole. 108 inches up to the center of the coax and start with about 118 inches for the down side and hook it to the shield of the coax. trim the longer end after you get it set up to ajust the swr. you could get fancy and hook up a 1:1 balun at the antenna feed point. 8) [/QUOTE]

Top Bottom