• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Reply to thread

Thanks for the reply. I do have the calibration ends. It's only a shorted, open and  50 ohm end. That's all you need. To be plan what I'm looking for is to get the resonance as close to "0" as I can. I have seen calibrating it at the meter and at the tee with and without the dummy load get you different readings. I'm just unsure as to which one is correct. I've lost a good portion of my mind at this point.