Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

VX8DR Smart Beaconing Question

S

SkipA

Member
Jul 6, 2011
2
0
11
77
With Smart Beaconing on, how it the beacon rate determined? Assume slow setting set to 10 MPH and fast set to 60 MPH.
< 10 MPH uses Slow rate?
> 60 MPH uses Fast rate?
What happens between 10 and 60? Standard beacon rate? :confused1:
 

Nothing in the manual about using #12 BEACON INTERVAL as the fill-in for the middle range, but it only makes sense.

I see SmartBeacon as a means to address extremes of speed and rate of turn so for the middle range #12 would seem to be the workable default.

Mike
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom