O.k. I have a stupid little question here maybe some one can help me on. I have got an old SCP SC-2000w swr/watt meter hooked up to my Magnum S-45. My question is "can I use that meter to roughly check the swr on the 2 meter band". Thanks
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
Will this meter work?
- Thread starter onefastneonrt
- Start date
O.K. better not try then. This particular meter uses a toroid transformer to obtain its readings. Now I have been told that you could use that particular setup on the vhf band with minimal disruption, of course using a low power rating. I don't; know better not to try then try and be without a meter.
dxChat
- No one is chatting at the moment.
-
-
@ heartbreaker3473:Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
-
@ AudioShockwav:Wes, it's better if you start a thread on the main forum, more people are going to see your question.
-
-
@ heartbreaker3473:I put it in the general disscution help area and started a new thread. Thank you for letting me know.