Can someone please tell me the pin layout for a stock Lafayette mic to be used on a Lafayette SSB-50 mobile radio. It has the "Y" configuration mic plug. TIA... So it will be like top left, top right, center and bottom.
-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
-
A Winner has been chosen for the 2026 July 4th Retevis RA89R Giveaway! Click Here to see who won!
Wiring for a stock mic to a Lafayette SSB-50 cb radio
- Thread starter danmcclain
- Start date
I got this diagram out of the sams info for the SSB-50. So can some read this diagram and tell me where the following wires go? Red/Black/White/Shield
IF this is right:
Top left and top right are ground.
Center is audio.
Bottom is coming from the RX\TX relay.
Reading your second post I could only guess at which color goes where, other than shield going to either top left or top right. Maybe crack the mic open and ohm out the wires? Unless someone gorilla'd the screws and stripped the heads, of course.
- No one is chatting at the moment.
-
-
-
@ BJ radionut:Scheduled for Jul 4, 2026 Saturday Live Streams:
To celebrate the 250th birthday of our great nation. We are giving away not just one, but multiple antennas! The Grand prize is the CaHR-Tenna Hydra Antenna, along with several other antenna prizes that will be announced throughout the giveaway. Whether you're a new ham, portable operator, POTA activator, or an experienced HF operator, this is your chance to upgrade your station. Prizes Include: HRA Hydra Antenna (Grand Prize) Additional antennas from HRA More prizes may be added during the giveaway! -
-
