Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Yaesu Ft 729


Nemo said:
I have a Yaesu Ft 729. How can I modificate the TX range
Click to expand...
After removing the internal chip resistor, turn on the power while pressing [▲] and [▼] at the same time.
The reception range (LCD display) after the modification is 110-180 MHz, 300-500 MHz and 800-950 MHz.
It should be noted that "turning on the power while pressing [▲] and [▼] at the same time" is a hard reset operation, and all memory contents are erased.
 
  • Like
Reactions: Robalo

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom