• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Yaesu FTM-350

haywire63

Member
Dec 28, 2010
11
0
11
Radio has been working fine until friday 9/2 and now everytime I push the B-TX button I get a "No MYCS". Hate doing a reset with 50 Freq on the unit.
 

Radio has been working fine until friday 9/2 and now everytime I push the B-TX button I get a "No MYCS". Hate doing a reset with 50 Freq on the unit.

Don't know what the "No Mycs" on the display meant, but found the trouble.
The coax cable has a short, dead short, 0 ohms, which I did not suspect because I still had voice communication with a repeater 30 miles away. It is working now. I connected my meter up and the SWR on voice was normal and the SWR on the APRS was off the scale.
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.