• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Yaesu YO-100 monitor scope

GnG8d

Well-Known Member
Jun 28, 2010
2,037
354
93
Ohio
$150 check/MO or paypal as gift, plus shipping.

scope.jpg
 

A couple people wanted to see this thing in action, so I dug it out and hooked it up. I have my audio chain set up at 40mw at the radio using either Audacity or a stand alone frequency generator. I didn't adjust any levels on the YO-100, but I wanted to use the internal frequency generator to show that it worked as well. So I just ran an RCA cable from the scope to the input of the EQ. There is a slight burn in right at the horizontal center line.

There is a PDF of the operating manual online somewhere. I came across it once and was going to download it and read it, but I never used the scope, so I never needed the manual.

scope_1.jpg


scope_2.jpg


scope_3.jpg
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.