You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
I have started this project and I will be using the AB-Z-1 box from Westgate. I was wondering if anyone that has used this box would be willing to share some advice or give some pointers on it. Maybe some capacitor values, component values or hardware model numbers. I know the box is pre-punched...
Hello Marconi, Good to hear from you again. I hope that the class reunion was a success. I am trying to fix-up this old CLR for my dad. He has recently had an interest in getting on 11mtrs. with me and needed a good ground plane. I looked for the dimples on the tubing and didn’t see any. I can...
Does anyone have the frequency unlocking procedure for this radio? I had someone give one to me and I am not sure that it is for this radio.
Conversion:
#1- Remove cover from radio.
#2- Move the jumper JP275 to pin's 2 & 3
#3- Right behind JP275 is an empty socket marked J2.
#4- unplug the...
ANYONE HAVE ANY INFO ON THIS SWEEP TUBE AMPLIFIER? BOARDS IN IT HAVE D.J. ELCETRONICS ON THEM. IT HAS NINE 21JS6A TUBES IN IT. I WAS LOOKING FOR A SCHEMATIC FOR IT.
THANKS,
ED
Hey Weatherman take a look at my power supply project I built a few years ago http://forum.worldwidedx.com/viewtopic.php?t=1975 . I have the schematic posted for it in the photo album link. Maybe this might be of some help with your project. I have alot of spare power supply parts so let me know...
Has anyone used or using the C.A.T.S. QUICK-CONNECT (QC) for their rotor? I ordered one yesterday and was wondering if anyone has used this. Here's a link to the connector http://www.rotordoc.com/
ED
I have one of these kits with the black wire broke off of it. Can anyone tell me where the correct placement of the wire is, or send me a picture of it?
Thanks,
ED
Thanks for the reply and no I did not let the radio sit for long before I tried to adjust for proper frequency. This is a very interesting part of the procedure I didn't know anything about. I wonder what the waiting period does as for as the tuning? I only made slight adjustments as to keep...
This forum does not allow a single user to have more than one username. If anyone wants to change their username contact an admin and it will be done. Multiple accounts belonging to the same member will be deleted without warning.