Search results

ok thanks

yah i was just trying to get some opinions on what average watts would be on a rfx75 and opinions on 520 cuz ive others say they only do 30 watts max

jw whatis really true ive seen guys post irf520 with resisters changed etc putts out 45-50 watts ive also heard that a 520 wont do that many watts? ive heard people say a 1969 final was the same as a 520? last when you install a rfx75 ive heard others say they put out 8o watts-110 even...

I have the hustler 6" inch spring for mine mine seems to work well but mine isnt on a liberty

you can heat up the glue with a sold iron

pressed in? what u mean? the leds are soldered into a board for tx there is some screws on the inside of the facemount where the anl switches are too

i wanted to know some parts to pickup while im shopping for a radio when u watch people or custom cb shop they have parts there like voltage regs things like that i have protection diodes and small diodes to replace am mod parts that are cut but wanna know some usuall parts to get at radio...

leaving it on shouldnt effect the rx is ur coax still good? if your good with solder joints check the board make sure that all connections are good ur antenna if there is sound on the radio at all its not the speaker if no sound at all try a ext speaker just a longer list to check

dude thats way ugly lookng though

ok im going to try to tap around on the recieve side and see if theres any bad joints

the pa is workin i had to put a new protection diode in it does anyone know what d17 is? ive looked it looks like its starting to burn

im getting no recieve rf is up ive checked all that the pa works the s meter doesnt move cant tell im transmitting rxtx light comes on im not really sre bout the display i turn the channel selecter but still no talk just static

thanks but i used the mic off of my uniden and i checked all settings

i love my 102" whip i can hear base stations up to 35 miles away transmitt varies with any antenna

a guy gave me a cobra 25 for free i checked it and no recieve -havent checked solder yet channel display gone turn channel selecter cant tell its changin channels its not the antenna ive hooked it up to my uniden 68 can yall help me to pin point these things

i have my rf gain wires soldered together i did the cbradiomag site trick i used a 470 uf cap and a 100 ohm res i get 0- 12 watt deadkey. very easy to set on RF gain var knob

I wouldnt worry with it the meter issue and everything is too much to worry with.go to a yard sale or shop and buy another one.Esp it being put up a long time

Hey i got my radio fixed yesterday.I went to the cbshop and they tuned it and peaked it and I have 26 watts on it now. Problem 2 comes with bad coax now I have tried and tried and the swrs are bad on my coax I think it has a short I cant get out over 2 miles. I grounded it to the bumper...

Do yall know if vr4 is the pot or is it vr5 cuz he said vr5 raised the deadkey and the mod it was shown 30db now its 5

K ill try i just hate askin for a check and my radio is showin 5 on the rf but no response